Hi,

I just upgraded form 3.26 to 3.30.
I get the error:

Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is also
contained in package 'db326d7r'

If I try to open, compile and install 'db330d7d.dpk' then I get the same
error.

What is going wrong?

Thanks,
Ronald van der Pas

Sounds like you have another package that is using db326d7r.

Do you have any other 3rdparty libs that include DBISAM?
You will have to open that dpk and replace it with db330d7r

Scott.

"Ronald van der Pas" <rvdpas@nib.nl> wrote in message news:FD3FBBF5-D0E2-4869-A722-F3A63C06D466@news.elevatesoft.com...
> Hi,
>
> I just upgraded form 3.26 to 3.30.
> I get the error:
>
> Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is also contained in package 'db326d7r'
>
> If I try to open, compile and install 'db330d7d.dpk' then I get the same error.
>
> What is going wrong?
>
> Thanks,
> Ronald van der Pas
>
>
>

Ronald,

<< Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is
also contained in package 'db326d7r'

If I try to open, compile and install 'db330d7d.dpk' then I get the same
error. >>

Make sure that you don't have the 3.26 package still listed in the list of
installed packages under Component/Install Packages.  It sounds like the
3.26 package didn't get removed.  Either that, or what AJ said - there's
another package loaded that is using the 3.26 runtime package.

Did you make sure to close down Delphi when you uninstalled 3.26 and
installed 3.30 ?  If you don't, then the uninstall and reinstall won't work
properly.

--
Tim Young
Elevate Software
www.elevatesoft.com

I have not uninstalled it properly.
I have deleted it form the list and I have removed all directories.
I do not have third party software that uses it.
I uninstalled 3.30 and installed 3.26 again. That works OK.
If I uninstall 3.26 and try 3.30 agian then I get the same error.


"Tim Young [Elevate Software]" <timyoung@elevatesoft.com> schreef in bericht
news:BB6997C4-6E67-4608-A0E2-31A798D4B305@news.elevatesoft.com...
> Ronald,
>
> << Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is
> also contained in package 'db326d7r'
>
> If I try to open, compile and install 'db330d7d.dpk' then I get the same
> error. >>
>
> Make sure that you don't have the 3.26 package still listed in the list of
> installed packages under Component/Install Packages.  It sounds like the
> 3.26 package didn't get removed.  Either that, or what AJ said - there's
> another package loaded that is using the 3.26 runtime package.
>
> Did you make sure to close down Delphi when you uninstalled 3.26 and
> installed 3.30 ?  If you don't, then the uninstall and reinstall won't
> work properly.
>
> --
> Tim Young
> Elevate Software
> www.elevatesoft.com
>
>

"Ronald van der Pas" <rvdpas@nib.nl> wrote in message
news:A081CE11-1CE4-4D4E-B091-54C685EE2CE8@news.elevatesoft.com...
>I have not uninstalled it properly.
> I have deleted it form the list and I have removed all directories.
> I do not have third party software that uses it.
> I uninstalled 3.30 and installed 3.26 again. That works OK.
> If I uninstall 3.26 and try 3.30 agian then I get the same error.
>
>
> "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> schreef in
> bericht news:BB6997C4-6E67-4608-A0E2-31A798D4B305@news.elevatesoft.com...
>> Ronald,
>>
>> << Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is
>> also contained in package 'db326d7r'
>>
>> If I try to open, compile and install 'db330d7d.dpk' then I get the same
>> error. >>
>>
>> Make sure that you don't have the 3.26 package still listed in the list
>> of installed packages under Component/Install Packages.  It sounds like
>> the 3.26 package didn't get removed.  Either that, or what AJ said -
>> there's another package loaded that is using the 3.26 runtime package.
>>
>> Did you make sure to close down Delphi when you uninstalled 3.26 and
>> installed 3.30 ?  If you don't, then the uninstall and reinstall won't
>> work properly.
>>
>> --
>> Tim Young
>> Elevate Software
>> www.elevatesoft.com
>>
>>
>
>

Ok calm down calm down.
Its easy peasy even girls can do it. (and Lambert's)

Reboot now go to control panel remove all DBISAM
references including the tools.

Now start Delphi look under the component link
click install packages if Dbisam shows as unchecked
click remove, it did tend to hang around in one version
I had as well.

Now go to tools if any references to Dbisam are still
lurking there remove them.

Close Delphi start whatever file manager you use and
delete all folders/files that held Dbisam.

Now the important bit reboot yes reboot the pc and
install the 3.30 version.

Rita

"Ronald van der Pas" <rvdpas@nib.nl> wrote in message
news:A081CE11-1CE4-4D4E-B091-54C685EE2CE8@news.elevatesoft.com...
>I have not uninstalled it properly.
> I have deleted it form the list and I have removed all directories.
> I do not have third party software that uses it.
> I uninstalled 3.30 and installed 3.26 again. That works OK.
> If I uninstall 3.26 and try 3.30 agian then I get the same error.
>
>
> "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> schreef in
> bericht news:BB6997C4-6E67-4608-A0E2-31A798D4B305@news.elevatesoft.com...
>> Ronald,
>>
>> << Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is
>> also contained in package 'db326d7r'
>>
>> If I try to open, compile and install 'db330d7d.dpk' then I get the same
>> error. >>
>>
>> Make sure that you don't have the 3.26 package still listed in the list
>> of installed packages under Component/Install Packages.  It sounds like
>> the 3.26 package didn't get removed.  Either that, or what AJ said -
>> there's another package loaded that is using the 3.26 runtime package.
>>
>> Did you make sure to close down Delphi when you uninstalled 3.26 and
>> installed 3.30 ?  If you don't, then the uninstall and reinstall won't
>> work properly.
>>
>> --
>> Tim Young
>> Elevate Software
>> www.elevatesoft.com
>>
>>
>
>

I did not mean to look annoyed with my lines written down one by one.
Sometimes I do that in the assumption that it gives a better view.
A will try your suggestions. Thank you.

"R. Tipton" <nospam@nospam.com> schreef in bericht
news:C228583C-4FC3-4485-BF36-B3D9DCCE45FE@news.elevatesoft.com...
> Ok calm down calm down.
> Its easy peasy even girls can do it. (and Lambert's)
>
> Reboot now go to control panel remove all DBISAM
> references including the tools.
>
> Now start Delphi look under the component link
> click install packages if Dbisam shows as unchecked
> click remove, it did tend to hang around in one version
> I had as well.
>
> Now go to tools if any references to Dbisam are still
> lurking there remove them.
>
> Close Delphi start whatever file manager you use and
> delete all folders/files that held Dbisam.
>
> Now the important bit reboot yes reboot the pc and
> install the 3.30 version.
>
> Rita
>
> "Ronald van der Pas" <rvdpas@nib.nl> wrote in message
> news:A081CE11-1CE4-4D4E-B091-54C685EE2CE8@news.elevatesoft.com...
>>I have not uninstalled it properly.
>> I have deleted it form the list and I have removed all directories.
>> I do not have third party software that uses it.
>> I uninstalled 3.30 and installed 3.26 again. That works OK.
>> If I uninstall 3.26 and try 3.30 agian then I get the same error.
>>
>>
>> "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> schreef in
>> bericht news:BB6997C4-6E67-4608-A0E2-31A798D4B305@news.elevatesoft.com...
>>> Ronald,
>>>
>>> << Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which is
>>> also contained in package 'db326d7r'
>>>
>>> If I try to open, compile and install 'db330d7d.dpk' then I get the same
>>> error. >>
>>>
>>> Make sure that you don't have the 3.26 package still listed in the list
>>> of installed packages under Component/Install Packages.  It sounds like
>>> the 3.26 package didn't get removed.  Either that, or what AJ said -
>>> there's another package loaded that is using the 3.26 runtime package.
>>>
>>> Did you make sure to close down Delphi when you uninstalled 3.26 and
>>> installed 3.30 ?  If you don't, then the uninstall and reinstall won't
>>> work properly.
>>>
>>> --
>>> Tim Young
>>> Elevate Software
>>> www.elevatesoft.com
>>>
>>>
>>
>>
>
>

Thats a goodboy we have all been there.
Some Delphi stuff just hangs on and will
not go away.
Good Luck.
Rita

"Ronald van der Pas" <rvdpas@nib.nl> wrote in message
news:EFD9E0DC-C003-4E9B-BCB8-BFC516538E63@news.elevatesoft.com...
>I did not mean to look annoyed with my lines written down one by one.
>Sometimes I do that in the assumption that it gives a better view.
> A will try your suggestions. Thank you.
>
> "R. Tipton" <nospam@nospam.com> schreef in bericht
> news:C228583C-4FC3-4485-BF36-B3D9DCCE45FE@news.elevatesoft.com...
>> Ok calm down calm down.
>> Its easy peasy even girls can do it. (and Lambert's)
>>
>> Reboot now go to control panel remove all DBISAM
>> references including the tools.
>>
>> Now start Delphi look under the component link
>> click install packages if Dbisam shows as unchecked
>> click remove, it did tend to hang around in one version
>> I had as well.
>>
>> Now go to tools if any references to Dbisam are still
>> lurking there remove them.
>>
>> Close Delphi start whatever file manager you use and
>> delete all folders/files that held Dbisam.
>>
>> Now the important bit reboot yes reboot the pc and
>> install the 3.30 version.
>>
>> Rita
>>
>> "Ronald van der Pas" <rvdpas@nib.nl> wrote in message
>> news:A081CE11-1CE4-4D4E-B091-54C685EE2CE8@news.elevatesoft.com...
>>>I have not uninstalled it properly.
>>> I have deleted it form the list and I have removed all directories.
>>> I do not have third party software that uses it.
>>> I uninstalled 3.30 and installed 3.26 again. That works OK.
>>> If I uninstall 3.26 and try 3.30 agian then I get the same error.
>>>
>>>
>>> "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> schreef in
>>> bericht
>>> news:BB6997C4-6E67-4608-A0E2-31A798D4B305@news.elevatesoft.com...
>>>> Ronald,
>>>>
>>>> << Cannot load package 'db330d7r.' It contains unit 'DBISAMPw,' which
>>>> is also contained in package 'db326d7r'
>>>>
>>>> If I try to open, compile and install 'db330d7d.dpk' then I get the
>>>> same error. >>
>>>>
>>>> Make sure that you don't have the 3.26 package still listed in the list
>>>> of installed packages under Component/Install Packages.  It sounds like
>>>> the 3.26 package didn't get removed.  Either that, or what AJ said -
>>>> there's another package loaded that is using the 3.26 runtime package.
>>>>
>>>> Did you make sure to close down Delphi when you uninstalled 3.26 and
>>>> installed 3.30 ?  If you don't, then the uninstall and reinstall won't
>>>> work properly.
>>>>
>>>> --
>>>> Tim Young
>>>> Elevate Software
>>>> www.elevatesoft.com
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Rita,

<< Thats a goodboy we have all been there. Some Delphi stuff just hangs on
and will not go away. >>

3.x did not remove itself from the IDE automatically like 4.x does.  That's
most likely the issue he's having.

--
Tim Young
Elevate Software
www.elevatesoft.com

"Tim Young [Elevate Software]" <timyoung@elevatesoft.com> wrote in message
news:0C9E537A-80B5-4D45-9966-D6A939326D8D@news.elevatesoft.com...

> 3.x did not remove itself from the IDE automatically like 4.x does.
> That's most likely the issue he's having.
>

I know it drove me crazy, I guess Ronald has done it now he aint been back

Its all your fault you software billionaires just dont care.