Login ProductsSalesSupportDownloadsAbout |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM General » View Thread |
Messages 1 to 10 of 10 total |
Run version 3.3 in BDS 2006 |
Wed, May 30 2007 1:15 PM | Permanent Link |
Nick Spurrier | I was using V 3.3 client server (with source) in D7 and put Turbo Delphi (aka V 10) on another machine. Can't get it to compile. I'm sure the question has been asked and answered here
before but could someone point me in the right direction for any required code changes. I can sort the references in the dpks out myself (I hope). Thanks in advance Nick |
Thu, May 31 2007 11:59 AM | Permanent Link |
Nick Spurrier | To answer my own question, if you have the source code -
In dbisamcn.pas change the value of the MAX_FIELD_TYPES constant to 26 In dbisamtb make the following alterations to the constant declarations. These are required to match the declarations in dbtables.pas FldTypeMap: array[TFieldType] of Byte = ( TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_INT16,TYPE_INT32,TYPE_UINT16,TYPE_BOOL, // 0..5 TYPE_FLOAT,TYPE_FLOAT,TYPE_BCD,TYPE_DATE,TYPE_TIME,TYPE_TIMESTAMP,TYPE_BYTES, //6..12 TYPE_VARBYTES,TYPE_INT32,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB, // 13..19 TYPE_BLOB,TYPE_BLOB,TYPE_CURSOR,TYPE_ZSTRING,TYPE_ZSTRING,TYPE_INT64,TYPE_ADT, // 20..26 TYPE_ARRAY,TYPE_REF,TYPE_TABLE,TYPE_BLOB,TYPE_BLOB,TYPE_UNKNOWN,TYPE_UNKNOWN, // 27..33 TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_TIMESTAMP,TYPE_BCD, // 34..37 TYPE_ZSTRING,TYPE_BLOB,TYPE_TIMESTAMP,TYPE_INT32); // 38..41 FldSubTypeMap: array[TFieldType] of Word = ( 0,0,0,0,0,0, 0,SUBTYPE_MONEY,0,0,0,0,0, 0,SUBTYPE_AUTOINC,0,SUBTYPE_MEMO,SUBTYPE_GRAPHIC,SUBTYPE_FMTMEMO,0, 0,SUBTYPE_TYPEDBINARY,0,SUBTYPE_FIXED,SUBTYPE_UNICODE,0,0, 0,0,0,0,0,0,0, 0,0,0,0, 0,0,0,0); DataTypeMap: array[0..MAX_FIELD_TYPES-1] of TFieldType = ( ftUnknown,ftString,ftDate,ftBlob,ftBoolean,ftSmallint, ftInteger,ftFloat,ftBCD,ftBytes,ftTime,ftDateTime, ftWord,ftInteger,ftUnknown,ftVarBytes,ftUnknown,ftUnknown, ftLargeInt,ftLargeInt,ftADT,ftArray,ftReference,ftDataSet, ftTimeStamp,ftFMTBCD); BlobTypeMap: array[SUBTYPE_MEMO..SUBTYPE_BFILE] of TFieldType = ( ftMemo,ftBlob,ftFmtMemo,ftBlob,ftGraphic,ftBlob, ftTypedBinary,ftBlob,ftBlob,ftBlob,ftBlob,ftMemo,ftBlob, ftBlob,ftBlob); Add the following to dbisamvr.inc at the bottom of the file {$IFDEF VER180} {$DEFINE D3ORHIGHER} {$DEFINE C3ORHIGHER} {$DEFINE D4ORHIGHER} {$DEFINE C4ORHIGHER} {$DEFINE D5ORHIGHER} {$DEFINE C5ORHIGHER} {$DEFINE D6ORHIGHER} {$DEFINE C6ORHIGHER} {$DEFINE D7ORHIGHER} {$ENDIF} That's all you really need in order to compile the runtime and design-time packages. |
Thu, May 31 2007 12:31 PM | Permanent Link |
"camperos" | > To answer my own question, if you have the source code -
> > ...cut.... > > That's all you really need in order to compile the runtime and design-time packages. > Can I use the same change for Delphi 2007 ? Thanks C. |
Thu, May 31 2007 2:49 PM | Permanent Link |
Nick Spurrier | >"camperos" <noname@email.com> wrote:
>Can I use the same change for Delphi 2007 ? You would need to change the VER180 in the version defines file to VER190. I can't tell you it would work because I don't have Delphi 2007 but it's worth a try. Nick |
Thu, May 31 2007 2:58 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | << Can I use the same change for Delphi 2007 ? >> Yes. Delphi 2007 uses both the VER180 and VER185 IFDEFs for compilation in order to be backward-compatible with BDS 2006 compilation. -- Tim Young Elevate Software www.elevatesoft.com |
Thu, May 31 2007 2:59 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Nick,
<< You would need to change the VER180 in the version defines file to VER190. I can't tell you it would work because I don't have Delphi 2007 but it's worth a try. >> Actually it is VER185, but the VER180 IFDEF is also used so the code doesn't actually need to be changed at all. -- Tim Young Elevate Software www.elevatesoft.com |
Fri, Jun 1 2007 3:38 AM | Permanent Link |
Nick Spurrier | Tim,
Thanks for the correction. You may think it odd that some of us want to use v 3 in compilers later than D7 and it's not the upgrade cost (for me anyway). I used v 3.27 in many applications for clients, even converting some that I did using Paradox for Windows Version 1, and it proved rock solid - not even my most wayward client managed to break it - and I have a large investment in code libraries using DBISAM 3 that I can pick up and re-use. Nick |
Fri, Jun 1 2007 3:57 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Nick,
<< Thanks for the correction. You may think it odd that some of us want to use v 3 in compilers later than D7 and it's not the upgrade cost (for me anyway). I used v 3.27 in many applications for clients, even converting some that I did using Paradox for Windows Version 1, and it proved rock solid - not even my most wayward client managed to break it - and I have a large investment in code libraries using DBISAM 3 that I can pick up and re-use. >> I don't think that it's odd at all. I only think it's odd when some suggest that we should put out official releases for very old versions that we stopped development on years ago. -- Tim Young Elevate Software www.elevatesoft.com |
Sat, Sep 27 2008 4:54 PM | Permanent Link |
Abdulaziz Jasser | Nick,
I have a slimier case and I've done all the steps. Now how to install the new packages under d2007? Thanks... Nick Spurrier <nick@modesoft.co.uk> wrote: To answer my own question, if you have the source code - In dbisamcn.pas change the value of the MAX_FIELD_TYPES constant to 26 In dbisamtb make the following alterations to the constant declarations. These are required to match the declarations in dbtables.pas FldTypeMap: array[TFieldType] of Byte = ( TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_INT16,TYPE_INT32,TYPE_UINT16,TYPE_BOOL, // 0..5 TYPE_FLOAT,TYPE_FLOAT,TYPE_BCD,TYPE_DATE,TYPE_TIME,TYPE_TIMESTAMP,TYPE_BYTES, //6..12 TYPE_VARBYTES,TYPE_INT32,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB, // 13..19 TYPE_BLOB,TYPE_BLOB,TYPE_CURSOR,TYPE_ZSTRING,TYPE_ZSTRING,TYPE_INT64,TYPE_ADT, // 20..26 TYPE_ARRAY,TYPE_REF,TYPE_TABLE,TYPE_BLOB,TYPE_BLOB,TYPE_UNKNOWN,TYPE_UNKNOWN, // 27..33 TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_TIMESTAMP,TYPE_BCD, // 34..37 TYPE_ZSTRING,TYPE_BLOB,TYPE_TIMESTAMP,TYPE_INT32); // 38..41 FldSubTypeMap: array[TFieldType] of Word = ( 0,0,0,0,0,0, 0,SUBTYPE_MONEY,0,0,0,0,0, 0,SUBTYPE_AUTOINC,0,SUBTYPE_MEMO,SUBTYPE_GRAPHIC,SUBTYPE_FMTMEMO,0, 0,SUBTYPE_TYPEDBINARY,0,SUBTYPE_FIXED,SUBTYPE_UNICODE,0,0, 0,0,0,0,0,0,0, 0,0,0,0, 0,0,0,0); DataTypeMap: array[0..MAX_FIELD_TYPES-1] of TFieldType = ( ftUnknown,ftString,ftDate,ftBlob,ftBoolean,ftSmallint, ftInteger,ftFloat,ftBCD,ftBytes,ftTime,ftDateTime, ftWord,ftInteger,ftUnknown,ftVarBytes,ftUnknown,ftUnknown, ftLargeInt,ftLargeInt,ftADT,ftArray,ftReference,ftDataSet, ftTimeStamp,ftFMTBCD); BlobTypeMap: array[SUBTYPE_MEMO..SUBTYPE_BFILE] of TFieldType = ( ftMemo,ftBlob,ftFmtMemo,ftBlob,ftGraphic,ftBlob, ftTypedBinary,ftBlob,ftBlob,ftBlob,ftBlob,ftMemo,ftBlob, ftBlob,ftBlob); Add the following to dbisamvr.inc at the bottom of the file {$IFDEF VER180} {$DEFINE D3ORHIGHER} {$DEFINE C3ORHIGHER} {$DEFINE D4ORHIGHER} {$DEFINE C4ORHIGHER} {$DEFINE D5ORHIGHER} {$DEFINE C5ORHIGHER} {$DEFINE D6ORHIGHER} {$DEFINE C6ORHIGHER} {$DEFINE D7ORHIGHER} {$ENDIF} That's all you really need in order to compile the runtime and design-time packages. |
Sat, Sep 27 2008 4:55 PM | Permanent Link |
Abdulaziz Jasser | Nick,
I have a slimier case and I've done all the steps. Now how to install the new packages under d2007? Thanks... Nick Spurrier <nick@modesoft.co.uk> wrote: To answer my own question, if you have the source code - In dbisamcn.pas change the value of the MAX_FIELD_TYPES constant to 26 In dbisamtb make the following alterations to the constant declarations. These are required to match the declarations in dbtables.pas FldTypeMap: array[TFieldType] of Byte = ( TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_INT16,TYPE_INT32,TYPE_UINT16,TYPE_BOOL, // 0..5 TYPE_FLOAT,TYPE_FLOAT,TYPE_BCD,TYPE_DATE,TYPE_TIME,TYPE_TIMESTAMP,TYPE_BYTES, //6..12 TYPE_VARBYTES,TYPE_INT32,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB,TYPE_BLOB, // 13..19 TYPE_BLOB,TYPE_BLOB,TYPE_CURSOR,TYPE_ZSTRING,TYPE_ZSTRING,TYPE_INT64,TYPE_ADT, // 20..26 TYPE_ARRAY,TYPE_REF,TYPE_TABLE,TYPE_BLOB,TYPE_BLOB,TYPE_UNKNOWN,TYPE_UNKNOWN, // 27..33 TYPE_UNKNOWN,TYPE_ZSTRING,TYPE_TIMESTAMP,TYPE_BCD, // 34..37 TYPE_ZSTRING,TYPE_BLOB,TYPE_TIMESTAMP,TYPE_INT32); // 38..41 FldSubTypeMap: array[TFieldType] of Word = ( 0,0,0,0,0,0, 0,SUBTYPE_MONEY,0,0,0,0,0, 0,SUBTYPE_AUTOINC,0,SUBTYPE_MEMO,SUBTYPE_GRAPHIC,SUBTYPE_FMTMEMO,0, 0,SUBTYPE_TYPEDBINARY,0,SUBTYPE_FIXED,SUBTYPE_UNICODE,0,0, 0,0,0,0,0,0,0, 0,0,0,0, 0,0,0,0); DataTypeMap: array[0..MAX_FIELD_TYPES-1] of TFieldType = ( ftUnknown,ftString,ftDate,ftBlob,ftBoolean,ftSmallint, ftInteger,ftFloat,ftBCD,ftBytes,ftTime,ftDateTime, ftWord,ftInteger,ftUnknown,ftVarBytes,ftUnknown,ftUnknown, ftLargeInt,ftLargeInt,ftADT,ftArray,ftReference,ftDataSet, ftTimeStamp,ftFMTBCD); BlobTypeMap: array[SUBTYPE_MEMO..SUBTYPE_BFILE] of TFieldType = ( ftMemo,ftBlob,ftFmtMemo,ftBlob,ftGraphic,ftBlob, ftTypedBinary,ftBlob,ftBlob,ftBlob,ftBlob,ftMemo,ftBlob, ftBlob,ftBlob); Add the following to dbisamvr.inc at the bottom of the file {$IFDEF VER180} {$DEFINE D3ORHIGHER} {$DEFINE C3ORHIGHER} {$DEFINE D4ORHIGHER} {$DEFINE C4ORHIGHER} {$DEFINE D5ORHIGHER} {$DEFINE C5ORHIGHER} {$DEFINE D6ORHIGHER} {$DEFINE C6ORHIGHER} {$DEFINE D7ORHIGHER} {$ENDIF} That's all you really need in order to compile the runtime and design-time packages. |
This web page was last updated on Sunday, May 5, 2024 at 07:30 PM | Privacy PolicySite Map © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? E-mail us at info@elevatesoft.com |