Login ProductsSalesSupportDownloadsAbout |
Home » Technical Support » Elevate Web Builder Technical Support » Support Forums » Elevate Web Builder General » View Thread |
Messages 1 to 10 of 11 total |
Controls and scrollbar |
Tue, Nov 19 2013 2:04 PM | Permanent Link |
Ronald | Hi,
I have a TPanel with a lot controls (TEdit etc.). They do not all fit on the Panel, so I used the Versical Scrollbar property to fit them all. That works fine, but if I close EWB and open it again, all the (lower) controls have crawled back to a visible position. So the controls now are on top of each other. Is there a workaround that I can use to prevent this? Greetings, Ronald |
Wed, Nov 20 2013 1:22 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Ronald,
<< I have a TPanel with a lot controls (TEdit etc.). They do not all fit on the Panel, so I used the Versical Scrollbar property to fit them all. That works fine, but if I close EWB and open it again, all the (lower) controls have crawled back to a visible position. So the controls now are on top of each other. Is there a workaround that I can use to prevent this? >> This is a bug in the current release/build, and will be fixed in the upcoming 1.03. Tim Young Elevate Software www.elevatesoft.com |
Fri, Jan 17 2014 3:31 PM | Permanent Link |
Ronald | Hi, in version 1.03 this still is not correct. It was the repair I was
actually waiting for. Can you fix it? Greetings, Ronald "Ronald" schreef in bericht news:07142280-8F8B-4C42-AD37-5D934D7087E3@news.elevatesoft.com... Hi, I have a TPanel with a lot controls (TEdit etc.). They do not all fit on the Panel, so I used the Versical Scrollbar property to fit them all. That works fine, but if I close EWB and open it again, all the (lower) controls have crawled back to a visible position. So the controls now are on top of each other. Is there a workaround that I can use to prevent this? Greetings, Ronald |
Fri, Jan 17 2014 3:39 PM | Permanent Link |
Ronald | Hi Tim,
I just tested it, but it is still not fixed. In designmode it looks fine (better than 1.02), but at runtime all controls are all over each other. This was my main hope for 1.03. Can you give it a look? Greetings, Ronald "Tim Young [Elevate Software]" schreef in bericht news:C14E5F57-49C2-474B-97A6-846DBC0F7884@news.elevatesoft.com... Ronald, << I have a TPanel with a lot controls (TEdit etc.). They do not all fit on the Panel, so I used the Versical Scrollbar property to fit them all. That works fine, but if I close EWB and open it again, all the (lower) controls have crawled back to a visible position. So the controls now are on top of each other. Is there a workaround that I can use to prevent this? >> This is a bug in the current release/build, and will be fixed in the upcoming 1.03. Tim Young Elevate Software www.elevatesoft.com |
Sat, Jan 18 2014 3:59 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Ronald,
<< Hi, in version 1.03 this still is not correct. It was the repair I was actually waiting for. Can you fix it? >> Please send me an example of what you're seeing. The bug that was fixed was this: http://www.elevatesoft.com/incident?action=viewaddr&category=ewb&release=1.03&incident=3971 So, there must be something different in your case that is accounting for the results that you're seeing. Thanks, Tim Young Elevate Software www.elevatesoft.com |
Sun, Jan 19 2014 6:40 AM | Permanent Link |
Ronald | Some controls in the forms in the attachment should only be visible by
scrolling the form. If I open the form in designtime of runtime the controls have all moved to the top of the form and are over all other controls. "Tim Young [Elevate Software]" schreef in bericht news:AB0DEE50-4CD5-4167-AC7E-F2471DE61CE7@news.elevatesoft.com... Ronald, << Hi, in version 1.03 this still is not correct. It was the repair I was actually waiting for. Can you fix it? >> Please send me an example of what you're seeing. The bug that was fixed was this: http://www.elevatesoft.com/incident?action=viewaddr&category=ewb&release=1.03&incident=3971 So, there must be something different in your case that is accounting for the results that you're seeing. Thanks, Tim Young Elevate Software www.elevatesoft.com Attachments: ip.zip |
Tue, Jan 21 2014 3:00 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Ronald,
<< Some controls in the forms in the attachment should only be visible by scrolling the form. If I open the form in designtime of runtime the controls have all moved to the top of the form and are over all other controls. >> Did you put the controls back to the correct location *after* installing 1.03 ? The form that you sent me has the controls in the wrong location to start with, which would be the case if the form was saved with 1.02 and then opened with 1.03. After you put the controls back into the correct location, they should stay put, which is what I'm seeing when I do the same with your form using 1.03. Tim Young Elevate Software www.elevatesoft.com |
Wed, Jan 22 2014 2:25 AM | Permanent Link |
Ronald | Yes, I have relocated the controls. Save the form, close EWB and open it
again. The controls have then moved. If I close EWB it asks me if I want to save the changes! So that really means EWB makes the changes itself. I could make a screencam so you can see. "Tim Young [Elevate Software]" schreef in bericht news:22C399FD-D16D-41FA-8291-AE3B8D4EFA3C@news.elevatesoft.com... Ronald, << Some controls in the forms in the attachment should only be visible by scrolling the form. If I open the form in designtime of runtime the controls have all moved to the top of the form and are over all other controls. >> Did you put the controls back to the correct location *after* installing 1.03 ? The form that you sent me has the controls in the wrong location to start with, which would be the case if the form was saved with 1.02 and then opened with 1.03. After you put the controls back into the correct location, they should stay put, which is what I'm seeing when I do the same with your form using 1.03. Tim Young Elevate Software www.elevatesoft.com |
Wed, Jan 22 2014 5:05 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Ronald,
<< Yes, I have relocated the controls. Save the form, close EWB and open it again. The controls have then moved. If I close EWB it asks me if I want to save the changes! So that really means EWB makes the changes itself. I could make a screencam so you can see. >> Never mind, I'm seeing it now. It's moving controls up slightly in some cases, and more in others. I'll see what the issue is and make sure a fix is in B2. Tim Young Elevate Software www.elevatesoft.com |
Tue, Jan 28 2014 6:58 AM | Permanent Link |
Ronald | Hi Tim,
Do you have any idea when it is fixed? Ronald "Tim Young [Elevate Software]" schreef in bericht news:166B63E9-2148-4167-B042-9050F54210F3@news.elevatesoft.com... Ronald, << Yes, I have relocated the controls. Save the form, close EWB and open it again. The controls have then moved. If I close EWB it asks me if I want to save the changes! So that really means EWB makes the changes itself. I could make a screencam so you can see. >> Never mind, I'm seeing it now. It's moving controls up slightly in some cases, and more in others. I'll see what the issue is and make sure a fix is in B2. Tim Young Elevate Software www.elevatesoft.com |
Page 1 of 2 | Next Page » | |
Jump to Page: 1 2 |
This web page was last updated on Sunday, December 1, 2024 at 03:59 PM | Privacy PolicySite Map © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? E-mail us at info@elevatesoft.com |